36V, 48V Switching Power Supply is used to supply power to Laser Stepper Motor and Driver etc. Laser Spare Parts as core component in Co2 Laser System. 36V and 48V Switch Power Supply is high reliability, low cost, 100% full load burn-in test, built in fan speed control
Protections: Over current/ over voltage
Over temperature/ short circuit
AC input voltage range...176~264VAC
Input frequency...47~63Hz
Inrush current...Cold start, 40A/230V
Input leakage current...0.7mA/ 230VAC
Line regulation (full load)...0.5%
Output voltage adjust range...10%
Output over current protection...110~130%, current limiting, auto recovery
Output over voltage protection...115~150%
Withstand voltage...I/P -O/P: 1.5KVAC/1min
I/P -F/G: 1.5KVAC/1min
O/P-F/G: 0.5KVAC/1min
Rise, Hold up time...50ms, 20ms@full load (typical)
Operating temp. & humidity...-10 ~+50, 20%~90%RH (non condensing)
Storage temp. & humidity...-20 ~+85, 20%~95%RH (non condensing)
Safety standards...Design refer to GB4943, UL60950, EN60950
EMC standards...Design refer to GB9254, EN55022 class A
Cooling method...Fan
Model |
DC Output |
Current |
Load Regular |
R& N |
Efficiency |
Dimension(mm) |
S-250-24 |
24V |
11A |
5% |
150mV |
76% |
210*110*55 |
S-300-36 |
36V |
11A |
5% |
150mV |
80% |
270*100*60 |
S-400-48 |
48V |
10A |
5% |
200mV |
84% |
270*100*60 |
S-600-48 |
48V |
12A |
5% |
200mV |
86% |
270*100*60 |