Contact us

Mactron Technology.

Tel: +86-769-2638 4404

Fax: +86-769-2638 4091  

Email: sales@co2-lasers.com   

      mactrontech@yahoo.com

Skype: mactrontech

Our New Site:

www.mactron-tech.com

Mactron Aliexpress Store

Mactron is The Audited Supplier from Made-In-China 

DPES Laser Engraving Machine EXPO Invitation

Tel: +86-769-2638 4404
Fax: +86-7

150W Co2 Laser Cutting Tube MTS-T150

150W Co2 Laser Cutting Tube MTS-T150

150W CO2 Glass Sealed Laser Tube , widely used to kinds of laser cutting machine,laser flat bed, cnc laser cutter etc. 150W Laser Tube max.power is 150 watts, the length is from 1800MM to 2000MM. The main advantage of 150 Watt Laser Tubes is enough power, steady, long life time etc. And we can offer the technology consulting and installation guide before your purchase in order to purchase the best product for you.

 

1. Features
The equipment components are horny glass, resonance and electrode horny glass: this Part is make up by discharge tube, water-cooling set , gas storage set and trachea with GG17 material. CO2 Seal laser instrument is three layers pipe. The inside is Discharging tube, the middle is water-purify set and the out layer is gas storage. go back trachea is it is it is it in charge of and store the trachea to discharge to feed through to use for resonance: This part is make up by all and output speculum. optical glass as basis, golden membrane surface, the reflection rate of the gold membrane speculum near 10.6um is more than 98%; Output speculum adopt 10.6um of radiation as basis as well as the multi-layer medium membrane.
Part of the electrode: CO2 laser instrument generally adopts the cold cathode, cylindrical shape, the negative pole material selection has great influence on life-span and the basic requirement is that low sputter rate, small gas absorption rate and used metal material is the nickel.

 

2. Usage

1. Make sure not to connect line of electrode by mistake. 
2. Connection the cool water pipe, input from cathode and output from the anode and no leak conservation storage before using. 
3. It’s better to fit checking equipment in water circulation system in case fault caused by water-break. For details please consult supplier.

 

3. Keep & Maintenance

1.Please check water circulation and make sure no bubble before using. 
2. Check output speculum of negative pole to make sure no dust or grease spot, scrub away them with aether cotton to avoid influencing life-span caused by power and facula. 
 
4. Performance

Sealed off 150W Co2 Laser Tube technology parameters table

Model

Length(mm)

The main parameters of performance indicators(Wavelength10.6µm)

Outside Diameter (mm)

Laser Spot (mm)

Triggering Voltage (kv)

Operating voltage (kv)

Triggering Current(mA)

Operating Current (mA)

Output power (watt)

Stability (%)

MTS-T130

1850

Ø80±2

≤6

26-28

19-21

7-8

25-28

≥120-130

10

MTS-T150

2000

Ø80±2

≤8

26-28

20-22

9-10

25-28

≥140-150

10